AR550S> show config dyna

# Command Handler configuration

# System configuration
set system name="AR550S"

# TIMEZONE configuration

# Flash memory configuration

# LOADER configuration

# User configuration
set user=manager pass=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx priv=manager lo=yes
set user=manager telnet=yes desc="Manager Account"

# TTY configuration

# ASYN configuration

# ETH configuration

# BRI driver configuration

# PRI driver configuration

# SWITCH (pre-VLAN) configuration

# LAPD configuration

# Q.931 configuration

# PPP templates configuration

# ISDN Call Control configuration

# TDM configuration

# SYN drivers configuration

# ASYN Call Control configuration

# Frame relay configuration

# LAPB configuration

# X.25 DTE configuration

# MIOX configuration

# L2TP configuration

# Sec Associations configuration

# VLAN general configuration

# VLAN port configuration

# IGMP Snooping configuration

# CLASSIFIER configuration

# SWITCH (post-VLAN) configuration

# PPP configuration
create ppp=0 over=eth0-ANY
set ppp=0 bap=off iprequest=on username="xxxxxxxx@bff.ocn.ne.jp" password="xxxxxx"
set ppp=0 over=eth0-ANY lqr=off echo=10

# DHCP (Pre IP) configuration

# DHCPv6 (pre-IPv6) configuration

# GRE configuration

# IP configuration
enable ip
enable ip remote
ena ip dnsrelay
add ip int=vlan1 ip=192.168.0.254
add ip int=ppp0 ip=0.0.0.0 mask=0.0.0.0
add ip rou=0.0.0.0 mask=0.0.0.0 int=ppp0 next=0.0.0.0
add ip rou=192.168.0.0 mask=255.255.0.0 int=vlan1 next=192.168.1.253
add ip dns int=ppp0

# IPv6 configuration

# SWITCH (post-IP) configuration

# PIM configuration

# PIM6 configuration

# DVMRP configuration

# X.25C configuration

# OSPF configuration

# CLNS configuration

# SNMP configuration
enable snmp
enable snmp authenticate_trap
create snmp community=public
enable snmp community=public trap
add snmp community=tohoRO manager=192.168.0.100
add snmp community=tohoRO traphost=192.168.0.100

# INT configuration

# Firewall configuration
enable firewall
create firewall policy="net"
disable firewall policy="net" identproxy
enable firewall policy="net" icmp_f=unre,ping
add firewall policy="net" int=vlan1 type=private
add firewall policy="net" int=ppp0 type=public
add firewall poli="net" nat=enhanced int=vlan1 gblin=ppp0

# RADIUS configuration

# Telnet configuration

# STT configuration

# BOOTP configuration

# NTP configuration
enable ntp
set ntp utc=+09:00:00
add ntp peer=192.168.0.100

# Ping configuration

# DHCP (Post IP) configuration

# DHCPv6 (post-IPv6) configuration

# IPX configuration

# DECnet configuration

# Appletalk configuration

# Bridge configuration

# ENCO configuration

# SSH configuration

# SSL configuration

# Log configuration

# RSVP configuration

# Mail configuration

# TPAD configuration

# IPSEC configuration

# ISAKMP configuration

# PKI configuration

# HTTP configuration

# VRRP configuration

# GUI configuration

# BGP configuration

# LB configuration

# TACP configuration

# SKEY configuration

# UPNP configuration

# PORTAUTH configuration

# 802.1X configuration

# MAC Based Auth configuration

# Software QoS configuration



# WANLB configuration


# LLDP configuration

# DDNS configuration

# TRIGGER Configuration

AR550S>